50 Operating
VIDAR Film Digitizer Installation Guide
Note: When a film has been staged, it is in the digitizer’s light
path. The ADC (Automatic Digitizer Calibration) feature requires
that the light path be clear of the film for proper background
calibration of the digitizer. The digitizer will automatically adjust
the film’s position to properly proceed with ADC. Depending on
the location of the film’s leading or trailing edge, and the length
of time the film has been blocking the light path, the film will be:
a) pushed up, or b) pushed down.
4. Using your scanning software, execute the Scan command.
Note: During extended batch scans (more than 5 films), the
digitizer may pause periodically to recalibrate. This is normal
operation.
Note: Proper orientation of the
film during loading depends on
the scanning application program
you are using. Some scanning
programs rotate images 180° for
display. If images appear upside
down, you may be able to set the
default orientation in the scanning
application. If this option isn’t
available, then insert films into the
digitizer upside down, as shown
here.
Comments to this Manuals