Adaptec AHA-2930CU Installation Guide download pdf (Page 35)

Installing device drivers 27

VIDAR Film Digitizer Installation Guide

Computers with Windows 2000 and Windows XP

Note:

 On Windows 2000 computers, Service Pack 2 or higher must

be installed. Computers without Service Pack 2 or higher

will not be supported.

 STI drivers have been tested with Windows XP Professional

Edition.

VIDAR’s STI device driver provides compatibility between VIDAR film

digitizers/scanners and Windows 2000 and Windows XP only. The

STI driver takes advantage of Microsoft’s Still Image Architecture (STI)

for digital imaging devices.

You will need:

 VIDAR Drivers and Toolkit Installation CD.

Installing the STI driver

Note: These instructions have been successfully tested on a

wide range of Windows 2000 and Windows XP systems. In

rare instances, you may have difficulty installing the STI driver.

If that happens, try again after logging on as Administrator, or

as a user with Administrator rights.

1. Power up the digitizer and computer exactly as described in “Apply

power: digitizer first, then PC,” earlier in this chapter.

2. Insert the VIDAR Drivers and Toolkit Installation CD into the CD-

ROM. The installer should launch automatically.

If the installer does not launch automatically, double-click the

appropriate CD drive icon under My Computer in Windows

Explorer.

3. Read and follow the on-screen instructions.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

No comments

Adaptec AHA-2930CU Installation Guide Page 35