Adaptec 3940UW User's Guide download pdf (Page 64)

5-4

AHA-3940U/3940UW/3940UWD User’s Guide

Stock Number: 511041-00, Rev. B Page: 5-4

Print Spec Number: 494569-00

Current Date: 2/14/97 ECN Date: 2/17/97

always scans Channel A first.) See Boot Device Options on page

3-10 for more information.

■

Check that there are no SCSI ID conflicts. Refer to the disk

drive manual to learn how to set the drive’s SCSI ID. You can

use SCSISelect to determine the SCSI IDs of devices on the SCSI

bus, as described on page 3-18.

■

Be sure that SCSI Parity Checking is consistently enabled or

disabled on all devices on the SCSI bus. See SCSI Parity Check-

ing on page 3-8.

■

Always turn the computer’s power

OFF

and

after changing

any values on a channel, in a

Setup

program, or on a SCSI

device. This ensures that the new initial values are loaded.

■

Check that the SCSI bus is properly terminated. See Terminat-

ing the SCSI Bus on page 2-11.

■

Check that the intended boot disk has been formatted and has

an active DOS partition. If the disk has not been formatted, run

the

Format Disk

utility included in SCSISelect. See SCSI Disk

Utilities on page 3-18.

■

Check cable connections and pin-1 orientation.

Using a Standard Drive as C and a SCSI Drive as D

■

Use the

Setup

program to map the second standard hard disk

(if one exists) out of the configuration.

■

Be sure that SCSI Parity Checking is consistently enabled or

disabled on all devices on the SCSI bus.

■

Verify that the channel and the SCSI devices are properly con-

figured and installed.

■

Always turn the computer’s power

OFF

and

after changing

any values on a channel, in a

Setup

program, or on a SCSI

device. This ensures that the new initial values are loaded.

■

Check that the SCSI bus is properly terminated.

■

Check that the disk is formatted and has a DOS partition. If the

disk has not been formatted, run the

Format Disk

utility

included in SCSISelect. See SCSI Disk Utilities on page 3-18.

■

Check cable connections and pin-1 orientation.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 81 82

Comments to this Manuals

No comments

Adaptec 3940UW User's Guide Page 64

Comments to this Manuals

Related products and manuals for Unknown Adaptec 3940UW