Adaptec 3940UW User's Guide Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
2-17
Installing the Host Adapter and SCSI Devices
AHA-3940U/3940UW/3940UWD User’s Guide
Stock Number: 511041-00, Rev. B Page: 2-17
Print Spec Number: 494569-00
Current Date: 2/14/97 ECN Date: 2/17/97
Complete these steps to finish the installation process:
1
Replace and secure the cover of the computer case.
2
Reconnect the power cords to all external SCSI devices and the
computer.
3
Tu r n
ON
the power to all devices.
4
Boot the computer.
If you need to change the configuration of the host adapter or SCSI
devices, follow the directions in Chapter 3, Configuring Your Host
Adapter. If you encounter any problems during installation, see
Chapter 5, Troubleshooting.
Running the Computers Setup Program
Normally, PCI-bus computers automatically configure the
AHA-3940U/3940UW/3940UWD IRQ, port address, and BIOS
address. In some cases, depending on what kind of motherboard
BIOS your computer uses, you may need to run the computer’s
Setup
program to enable the PCI bus parameters before your com-
puter can recognize the host adapter.
If your host computer does not recognize the host adapter after you
install it, enter the
Setup
program and check for PCI configuration
parameters. Usually you start the
Setup
program by pressing a key
or key combination when your computer boots and the host
computer BIOS message appears. The BIOS message normally states
the key or keys you must press to enter the
Setup
program. If you
are not sure, check the documentation for your computer.
If your computer has a combination of ISA (or EISA) boards and PCI
boards, you may need to configure the settings so that the IRQs used
by ISA/EISA boards are marked as Used and the PCI bus does not
try to assign them to other PCI boards. Also, some BIOS’s reserve a
set of available IRQs for PCI boards, and you have to assign these
IRQs manually.
Read the documentation for your computer’s
Setup
program to find
out more about configuration issues.
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 81 82

Comments to this Manuals

No comments