Adaptec 3940UW User's Guide Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
3-19
Configuring Your Host Adapter
AHA-3940U/3940UW/3940UWD User’s Guide
Stock Number: 511041-00, Rev. B Page: 3-19
Print Spec Number: 494569-00
Current Date: 2/14/97 ECN Date: 2/17/97
Caution:
A low-level format destroys all data on the drive.
Back up your data before performing this operation. You
cannot abort a low-level format once it starts.
Verify Disk Media
The
Verify Disk Media
utility scans the selected device’s media for
defects. If the utility finds bad blocks, it prompts you to reassign
them; if you select yes, those blocks will no longer be used.
Note:
You can press Esc at any time to abort the
Verify Disk
Media
utility.
Configuring Multiple Host Adapters
Follow these instructions if your computer has multiple host
adapters:
If you want your computer to boot from a specific SCSI drive,
install that drive’s host adapter in the slot with the lowest PCI
Device number. The Device number is determined by the slot
number on the PCI bus. Refer to your computer documenta-
tion to determine the PCI slot number and slot number order.
If you are booting from a drive connected to an AHA-3940U/
3940UW/3940UWD and you are using ISA/EISA-based host
adapters to support secondary devices, disable the BIOS on all
ISA/EISA-based host adapters.
If you are booting from a drive connected to an ISA/EISA-
based host adapter and you are using the AHA-3940U/
3940UW/3940UWD to support a secondary device, read the
documentation for the ISA/EISA-based host adapter to ensure
that the host adapter is at the lowest BIOS base address.
ISA/EISA-based host adapters that have their BIOS enabled
boot before the AHA-3940U/3940UW/3940UWD.
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 81 82

Comments to this Manuals

No comments