Adaptec 3940UW User's Guide download pdf (Page 40)

3-2

AHA-3940U/3940UW/3940UWD User’s Guide

Stock Number: 511041-00, Rev. B Page: 3-2

Print Spec Number: 494569-00

Current Date: 2/14/97 ECN Date: 2/17/97

Default Configuration Settings

This table lists the settings you can change with SCSISelect and the

default value for each setting. Some settings apply to the channels;

other settings apply individually to each device on the bus.

Setting is valid only if Multiple LUN Support is enabled.

10 MBytes/sec for AHA-3940U.

AHA-3940UW/3940UWD only.

Settings are only valid if channel BIOS is enabled.

If this setting is changed to Enabled, the Maximum Sync Transfer Rates are

20 MBytes/sec for the AHA-3940U and 40 MBytes/sec for the AHA-3940UW/

3940UWD.

Global Settings for Host Adapter Default Setting

Host Adapter SCSI ID 7

SCSI Parity Checking Enabled

Host Adapter SCSI Termination Automatic

Boot Device Settings Default Setting

Boot Channel A First

Boot Target ID 0

Boot LUN Number

SCSI Device Settings Default Setting

Initiate Sync Negotiation Yes (Enabled)

Maximum Sync Transfer Rate 20 MBytes/sec

Enable Disconnection Yes (Enabled)

Initiate Wide Negotiation

Yes (Enabled)

Send Start Unit SCSI Command

No (Disabled)

Include In BIOS Scan Yes (Enabled)

Advanced Host Adapter Settings Default Setting

Reset SCSI Bus at IC Initialization Enabled

Channel A BIOS (Configuration Utility Reserves BIOS

Space)

Enabled

Support Removable Disks under BIOS as Fixed Disks

Boot Only

Extended BIOS Translation for DOS Drives > 1 GByte

Enabled

Channel A Display <Ctrl-A> Message During BIOS

Initialization

Enabled

Multiple LUN Support

Disabled

BIOS Support for Bootable CD-ROM

Enabled

BIOS Support for Int 13h Extensions

Enabled

Support for UltraSCSI Speed

Disabled

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 81 82

Comments to this Manuals

No comments

Adaptec 3940UW User's Guide Page 40

Comments to this Manuals

Related products and manuals for Unknown Adaptec 3940UW