Adaptec AVA-2906 Installation Guide download pdf (Page 18)

SCSI Card 2906

Turn

the computer to boot it.

Install any software included with your SCSI device.

Continue with Installing the SCSI Card 2906 Software.

Installing the SCSI Card 2906 Software

To install the SCSI Card 2906 software (software driver), go to the

section below for the operating system (for example, Windows 95/

98) installed on your computer. If the operating system is not yet

installed, install it now. Refer to your operating system documenta-

tion for instructions.

Note:

If you have installed a new SCSI hard drive, you will

need to partition and format the drive with the ES-SCSI



AFDISK

before you can use your hard drive. Refer to your

hard drive documentation for instructions.

Computers with Windows 95/98

Turn

all external SCSI devices and then the computer.

Allow Windows 95/98 to load. Win 95/98 automatically will

detect the SCSI Card 2906.

When Windows prompts you for a driver, insert the Adaptec

EZ-SCSI diskette for Windows 95/98 and Windows NT into

the floppy disk drive or insert your Windows 95/98 CD-ROM

into the CD-ROM drive. Follow the instructions that appear

on-screen.

If prompted, restart your computer to finish setting up your

new hardware.

Click the Start button, point to Settings, and then click Control

Panel.

Double-click the System icon, and then click the Device Man-

ager tab.

Double-click the SCSI Controller icon. The driver for the SCSI

Card 2906 is listed as the “Adaptec AIC-7850 PCI SCSI Con-

troller.”

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Adaptec AVA-2906 Installation Guide Page 18