Adaptec AVA-2906 Installation Guide download pdf (Page 16)

SCSI Card 2906

For each external SCSI device you install, you need a high-

quality external SCSI cable. See the SCSI Card 2906 User’s Refer-

ence for additional information on connecting your SCSI

devices and ordering cables.

Connect the other end of the cable to a SCSI connector on the

back of the external SCSI device as shown below. If you are

installing only one external SCSI device, terminate the device.

Termination usually is controlled by installing or removing a

SCSI terminator. On some SCSI devices, you use a switch or

button on the back of the SCSI device. Refer to the SCSI

device’s documentation to determine how to enable or disable

termination. See the SCSI Card 2906 User’s Reference for addi-

tional information on termination.

DB25-pin (Female) Connector

DB25-pin External SCSI (Male)

Cable (not included in package)

SCSI Termination

Switch

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Adaptec AVA-2906 Installation Guide Page 16