Adaptec PCI Ethernet and Fast Ethernet Adapters User's Guide download pdf (Page 97)

B-1

▼▼▼▼

Troubleshooting

Note:

Consult the

\readme\emdiag.txt

file for the latest

information and instructions. Some procedures or

information may have changed or may not have been

available when this user’s guide was printed.

This chapter explains how to use the Adaptec

EMDIAG

program,

and how to troubleshoot problems that you may be having with

your NIC.

If your NIC is not functioning properly, first make sure that it was

set up according to instructions in this document.

Verify that your NIC is installed properly and configured

correctly (see Chapter 2,

Installing Your NIC

Verify that your network is properly cabled and the NIC is

properly connected (see

Connecting to Your Network Cable

page 2-2 and Appendix A,

Cables and LEDs

Verify that the NIC's network driver is installed correctly

(see Part 2,

Installing LAN Drivers

or Part 3,

Installing Duralink

Failover Drivers

Verify that you are using the latest BIOS for your computer,

and the latest driver for your NIC.

If the NIC still does not work, run the NIC’s diagnostic tests.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 121 122

No comments

Adaptec PCI Ethernet and Fast Ethernet Adapters User's Guide Page 97