Adaptec PCI Ethernet and Fast Ethernet Adapters User's Guide download pdf (Page 36)

4-4

Fast Ethernet Network Interface Cards

Configuring Protocols

From the INETCFG main menu, select Protocols. Enable the

appropriate protocols for your network.

Press Esc to exit, saving your protocol configuration.

From the INETCFG main menu, select Bindings. Highlight the

NIC to bind and press Ins.

Select your configuration settings. Consult your network

administrator or NetWare documentation for details.

Repeat Steps 3 and 4 to bind multiple frame types or protocols

to one port if needed.

Note:

It is not necessary to bind multiple frame types

and protocols for each port.

Press Esc and save your configuration as you exit. Press Esc

again to exit the INETCFG utility.

At the server console type down and then type restart system

to start the new configuration.

When finished booting, type config at the console prompt to

confirm your configuration settings.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 121 122

No comments

Adaptec PCI Ethernet and Fast Ethernet Adapters User's Guide Page 36