Adaptec ASR-6405E User's Guide Page 113

  • Download
  • Add to my manuals
  • Print
  • Page
    / 145
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 112
Appendix D: Using the Adaptec Flash Utility 113
Updating the Flash Using the AFU Command Line
1 Create the firmware update disks (see page 109).
2 Shut down your operating system and reboot to DOS from a bootable DOS floppy disk or
from a DOS partition on a bootable drive. (You can use a disk connected to the controller
youre updating.) If your computer isn’t set up to boot from the bootable floppy disk or a
bootable device other than a disk drive, enter the system setup utility to change the setting.
3 Insert the firmware update disk containing AFU.exe
4 At the DOS command, if you have multiple controllers and you don’t know the number of
the controller you want to update, type
AFU LIST
, then press Enter. Otherwise, skip to the
next step.
5 At the DOS command, type AFU followed by a command (see page 110) and any switches
you want.
6 Update the flash using the instructions suitable for your requirements:
To update a single RAID controller:
AFU UPDATE /C <cont_number>
Where <cont_number> is the number of the RAID controller whose firmware you
are updating. For example, to upgrade Controller 0, type
AFU UPDATE /C 0
To update multiple RAID controllers:
AFU UPDATE /C <cont_number_a>,<cont_number_b>
Where <controller_number_a> and <controller_number_b> are the
numbers of the Adaptec RAID controllers whose firmware you are updating. For
example, to upgrade controllers 0, 2, and 3, type
AFU UPDATE /C 0, 2, 3
To update all RAID controllers simultaneously
:
AFU UPDATE /C all
Note: The UFI file identifies the RAID controllers, so you don’t have to worry about
flashing the wrong controller.
7
When prompted, insert the first firmware disk into your floppy disk drive.
The AFU reads the first disk.
8 When prompted, remove the first firmware disk and insert the second firmware disk into
your floppy disk drive.
9 Repeat Step 8 as required until the flash update is complete.
Page view 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 144 145

Comments to this Manuals

No comments