Adaptec 2940U2W Instruction Manual download pdf (Page 17)

Using the SCSI Card 2940U2W and SCSI Peripherals

Ultra2 Hard Disk Drives

■

We recommend keeping your Ultra2 hard disk drives separate

from your non Ultra2 peripherals. Connecting a non Ultra2

hard disk drive to the Ultra2 connector on the SCSI Card

2940U2W causes the Ultra2 SCSI segment of the SCSI bus to

drop down to Ultra SCSI performance levels (40 MBytes/sec).

■

Do not connect your Ultra2 hard disk drives to connectors

other than the Ultra2 connectors on the SCSI Card 2940U2W.

■

Internal Ultra2 SCSI peripherals come from the factory with

termination disabled and cannot be changed. Proper termina-

tion is provided by the built-in terminator at the end of the

Ultra2 internal SCSI cable provided in the kit.

Scanners

■

You will need to install the scanner manufacturer’s proprietary

software drivers. See your scanner’s documentation for details.

Ultra2 External Connector

Ultra2 Internal Connector

Figure 1. Ultra2 Internal and External Connectors

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

No comments

Adaptec 2940U2W Instruction Manual Page 17