Adaptec 39160 Installation Guide download pdf (Page 24)

Adaptec SCSI Card 39160 User’s Reference

Starting SCSI

Select

Follow these steps to start SCSI

Select

Turn on or restart your system.

During the startup process, pay careful attention to the mes-

sages that appear on your screen.

When the following message appears on your screen, press the

Ctrl-A

keys simultaneously (this message appears for only a

few seconds):

Press <Ctrl><A> for SCSISelect (TM) Utility!

Select SCSI Channel

. Most SCSI

Select

options can be set

separately for each SCSI channel.

From the menu that appears, use the arrow keys to move the

cursor to the option you want to select, then press

Enter

Note:

If you have difficulty viewing the display, press

toggle between color and monochrome modes. (This feature

may not work on some monitors.)

Exiting SCSI

Select

Follow these steps to exit SCSI

Select

Press

Esc

until a message prompts you to exit (if you changed

any settings, you are prompted to save the changes before you

exit).

At the prompt, select

Yes

to exit, then press any key to reboot

the computer. Any changes you made in SCSI

Select

take effect

after the computer boots.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

No comments

Adaptec 39160 Installation Guide Page 24