Adaptec APA-358 User Manual download pdf (Page 81)

Backup Partitions Only

Enabling this option configures SnapBack to backup only

the partitioned area of the hard drive (as defined in the

master boot record). For example, if you have a 40MB DOS

partition and a 1023MB NetWare partition on a 2GB hard

drive, SnapBack would back up only 1063MB, as opposed

to 2GB, if this option were checked. The default setting is

not checked.

Note > If the disk drive is larger than the backup tape, leaving the disk

partially un-partitioned is a viable interim backup solution.

Pause During User I/O

With this setting enabled SnapBack will pause the backup

when user I/O is sent to the server, giving the user top

priority. To maintain server responsiveness during backup

leave this option set (the default).

Netware

Spanning/Cascading

This setting allows SnapBack to span tapes when backing

up large hard drives or cascade across multiple tape drives.

In order to span or cascade, this option must be checked.

The default is not checked.

Note > Spanned or cascaded tapes cannot be mounted by TD-ROM.

NetWare NLM Management

It may be necessary to unload some NLMs before each

scheduled backup. NLMs that cause excessive disk I/O,

such as virus checking, FAX, or communication programs,

can be unloaded before each backup and reloaded after

completion.

SnapBack Live! 81

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 150 151

No comments

Adaptec APA-358 User Manual Page 81