Adaptec AHA-2740-T User Manual download pdf (Page 50)

Before Re-booting Your System

Before re-booting your system and configuring your host adapter,

make sure you have completed the following:

➤

1 The SCSI bus is properly terminated.

2 Each SCSI device on the SCSI bus is set to a unique SCSI ID

between 0 and 7.

3 The host adapter is firmly seated in the host computer’s EISA

slot.

4 Internal SCSI devices are connected to the host adapter with

the 50-pin SCSI ribbon cable and that proper Pin 1 orientation

is maintained.

5 External SCSI devices are properly installed and cabled.

6 If using the on-board floppy controller on the AHA-2742/2742T,

the floppy diskette drive is connected to the host adapter with

the 34-pin SCSI ribbon cable and that proper Pin 1 orientation

is maintained.

7 All system and power cables are properly connected.

Reassemble the System

Refer to your system and SCSI device documentation to replace

the system cover and connect all system and SCSI device power

cables.

❒

Adaptec AHA-2740 Series User’s Manual

Stock Number: 510381-00 / Rev. C (Page 2-23)

Print Spec Number: 491709-00 Rev C

Current Date: 9/1/93 ECN Date: 9/14/93

Getting Started

2-23

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 132 133

No comments

Adaptec AHA-2740-T User Manual Page 50