Adaptec 6320SS - DuraStor Hard Drive Array User's Guide Page 83
- Page / 139
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
6-5
Managing Disk Drives and Enclosures
Enabling and Disabling SMART Changes
You can enable or disable the ability to change the Self-Monitoring
Analysis and Reporting Technology (SMART) settings for all disk
drives connected to the controller. The setting options are:
■ Enable (default)
■ Disable
■ Don’t Modify—Use if you do not want the controller to change
any disk drive’s SMART settings.
On most disk drives, SMART is disabled by default by the
manufacturer. You may want to enable it if you want disk drives to
be able to recover from errors on their own.
To enable or disable SMART changes:
1 From the System Menu, select Configuration Menu and press
Enter.
The Configuration menu appears.
2 Select Disk Configuration and press Enter.
The Disk Configuration menu appears.
3 Select SMART and press Enter.
The SMART menu appears. The current setting is marked with
an * next to it.
4 Select the option you want and press Enter.
5 Reboot or rescan to have your changes take effect.
See Rebooting the Controller on page 5-2 or Rescanning All
Channels on page 5-21.
Blinking a Disk Drive LED
You can blink the LED of a specific disk drive. The drive continues
blinking its LED until you do one of the following:
■ Press Esc before Adaptec Disk Array Administrator times out.
■ Repeat the blink LED command, which toggles the Blink LED
command off.
- Adaptec Disk Array 1
- Administrator 1
- Copyright 2
- Trademarks 2
- Disclaimer 2
- Contents 3
- 3 Monitoring System Status 4
- 4 Managing Spares 4
- 5 Configuring the Controller 4
- 7 Troubleshooting 5
- A Storage Concepts 6
- B SAF-TE Implementation 6
- Getting Started 7
- Getting Online Help 8
- ↑ or ↓ key 10
- Changing the Screen Display 11
- Creating and Managing 12
- Arrays and Partitions 12
- Managing Arrays 20
- Viewing Array Status 22
- Viewing Disk Drive Status 23
- Verifying an Array 24
- Viewing Verification Status 25
- Reconstructing an Array 26
- Expanding Array Capacity 27
- Viewing Expansion Status 28
- Changing an Array Name 29
- Changing Array Ownership 29
- Trusting an Array 30
- Deleting an Array 32
- Managing Partitions 33
- Viewing Partition Status 35
- Viewing Partition Statistics 36
- ■ I/O size 37
- Expanding a Partition 38
- Changing a Partition Name 38
- Changing a Partition LUN 39
- Deleting a Partition 40
- Monitoring System Status 41
- Viewing the Most Recent Event 43
- Viewing One Event at a Time 43
- Information 44
- Displaying Overall Statistics 47
- Resetting Overall Statistics 49
- Managing Spares 50
- Managing Dedicated Spares 51
- Enabling Dynamic Spares 52
- Managing the Spare Pool 54
- Displaying the Spare Pool 55
- Configuring the Controller 56
- Rebooting the Controller 57
- Changing the Date and Time 57
- Configuring the Host Channels 58
- Configuring the SCSI Channels 61
- Understanding Operating Modes 63
- Changing the Operating Mode 65
- Managing the Other Controller 66
- Killing the Other Controller 68
- Disabling SCSI Channel 3 69
- Changing the Sample Rate 70
- Locking the Cache 72
- Configuring the Battery 73
- 2 Select Yes and press Enter 74
- 3 Press Enter to reboot 74
- Changing the Utility Priority 75
- Rescanning All Channels 76
- Pausing I/O 77
- Restoring Default Settings 78
- Managing Disk Drives and 79
- Enclosures 79
- Displaying All Disk Drives 80
- Displaying Disk Cache Status 82
- Blinking a Disk Drive LED 83
- Taking Down a Disk Drive 84
- Testing a Disk Drive 85
- Managing SAF-TE Enclosures 86
- ■ Type NONE and press Enter 87
- Input Problems 90
- Array Problems 91
- Host SCSI Channel Problems 92
- Device SCSI Channel Problems 93
- Problems During Bootup 94
- Warning and Error Events 96
- Disk Channel 99
- Sense Key 99
- Sense Code 99
- Sense Code Qualifier 99
- Disk Channel SCSI ID 101
- Error Code 101
- Troubleshooting 103
- Storage Concepts 104
- Channels 105
- Disk Drives 105
- Controllers 105
- Storage Systems 105
- Free Space 107
- Partitions 107
- Array on Virtual 108
- Redundancy 109
- Array Types 109
- Volume Set 111
- Stripe Set (RAID 0) 111
- Mirror Set (RAID 1) 113
- , with one chunk of each 114
- Figure A-6 RAID 5 set 115
- SAF-TE Implementation 119
- Enclosure Considerations 120
- Host Communication Methods 121
- Glossary 122
- Glossary-2 123
- Glossary-3 124
- Glossary-4 125
- Glossary-5 126
- Glossary-6 127
- Glossary-7 128
- . See also 129
- Glossary-9 130
- Glossary-10 131
- Glossary-11 132
- Adaptec, Inc 139
- 691 South Milpitas Boulevard 139
- Milpitas, CA 95035 USA 139
Related products and manuals for Software Adaptec 6320SS - DuraStor Hard Drive Array
Software Adaptec AHA-1540CP User's Guide
(120 pages)
(120 pages)
Software Adaptec ICP5085BL User Manual
(36 pages)
(36 pages)
Software Adaptec ICP5085BR User Manual
(2 pages)
(2 pages)
Software Adaptec ASR-51645 User's Guide
(10 pages)
(10 pages)
Software Adaptec CDP-00276-01-A User's Guide
(45 pages)
(45 pages)
Philips 379221716 manuales
Manuales del propietario y guías del usuario para Iluminación De La Pared Philips 379221716.
Ofrecemos 1 manuales en pdf Philips 379221716 para descargar gratis por tipos de documentos: Ficha de datos
Comments to this Manuals