Adaptec 2270700-R Datasheet Page 88
- Page / 155
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 10: Solving Problems ● 87
3
Copy the file AFU.exe (from the
Adaptec
Installation DVD) and the firmware image files
(typically *.ufi) to a bootable DOS floppy disk, USB flash drive, or writable CD-ROM.
Note: Due to space limitations with floppy disks, you may need to create multiple floppy
disks for each firmware image.
4
Power off your computer, disconnect the power cord, then open the cabinet following the
manufacturer’s instructions.
5 Disconnect all cables from the controller, then attach a shorting jumper to the Mode 0
flash connector.
Note:
To locate the Mode 0 flash connector on your Adaptec RAID controller, see the
figures in
About Your RAID Controller
on page 17.
6
Reconnect the power cord, power on your computer, then boot to the drive containing the
AFU.exe file (see Step 3).
7 At the prompt, type
<drive-letter>:\afu update /c x
where
drive-letter
is the drive identifier (
a
for a floppy drive, for instance) and
x
is the
controller number.
Note:
You will be prompted to insert other disks, as needed.
8
When the flash is complete, power off your computer, disconnect the power cord, then
remove the jumper.
9 Close the computer cabinet, reconnect the power cord, then power on your computer.
The controller should boot correctly.
- Installation and User’s Guide 1
- Copyright 2
- Trademarks 2
- Disclaimer 2
- Contents 7
- 4 Getting Started 8
- 6 Creating a Bootable Array 8
- 9 Managing Your Storage Space 9
- 10 Solving Problems 9
- A Introduction to SAS 10
- B Understanding RAID 10
- Contents ● 11 11
- F Safety Information 12
- G Technical Specifications 12
- About This Guide 13
- How to Find More Information 14
- Kit Contents and System 15
- Requirements 15
- Kit Contents 16
- DVD-ROM drive 17
- About Your RAID Controller 18
- Array-level Features 19
- Adding a Flash Backup Module 20
- About the Adaptec RAID 5085 21
- About the Adaptec RAID 5405 22
- About the Adaptec RAID 5445 23
- About the Adaptec RAID 51245 25
- About the Adaptec RAID 51645 26
- About the Adaptec RAID 52445 27
- About the Adaptec RAID 5405Z 28
- About the Adaptec RAID 5445Z 29
- About the Adaptec RAID 2045 31
- Adaptec RAID 2405/2405Q 32
- About the Adaptec RAID 2805 33
- About the Adaptec RAID 6405 34
- About the Adaptec RAID 6445 35
- About the Adaptec RAID 6405E 37
- About the Adaptec RAID 6805E 38
- About the Adaptec RAID 6405T 39
- Getting Started 41
- Choosing a RAID Level 42
- Disk Drives 43
- Installation Options 46
- Basic Installation Steps 46
- In this chapter 47
- Installing the Controller 48
- Supercapacitor 50
- Connector on daughterboard 50
- SAS/SATA 51
- Single-port connector 51
- Typical SSD installation 53
- Connecting External Devices 54
- Next Steps 54
- Creating a Bootable Array 55
- Setting the Boot Controller 56
- Creating an Array 56
- Making Your Array Bootable 59
- Installing the Driver and an 60
- Operating System 60
- Creating a Driver Disk 61
- Installing with Windows 62
- Installing with SuSE Linux 64
- Installing with Debian Linux 64
- Installing with Ubuntu Linux 66
- Installing with Solaris 68
- Installing with VMware ESX 4 68
- Installing with VMware ESXi 5 69
- Installing with FreeBSD 72
- Installing on Windows 75
- Installing on Debian Linux 76
- Installing on Ubuntu Linux 76
- Installing on Solaris 77
- Installing on VMware 77
- Installing on FreeBSD 79
- Managing Your Storage Space 80
- About Adaptec Storage Manager 81
- Which Utility Should I Use? 82
- Solving Problems 84
- Failed Device is faulty On 85
- Other No error Off 85
- Resetting the Controller 87
- Introduction to SAS 89
- What is SAS? 90
- What’s a Phy? 91
- What’s a SAS Port? 92
- What’s a SAS Address? 92
- What’s a SAS Connector? 92
- What do SAS Cables Look Like? 92
- Direct-attach Connections 93
- Backplane Connections 93
- SAS Expander Connections 94
- Understanding RAID 96
- Understanding Drive Segments 97
- Non-redundant Arrays (RAID 0) 97
- RAID 1 Arrays 98
- RAID 1 Enhanced Arrays 98
- RAID 10 Arrays 99
- RAID 5 Arrays 100
- RAID 5EE Arrays 101
- RAID 50 Arrays 102
- RAID 6 Arrays 103
- RAID 60 Arrays 103
- Selecting the Best RAID Level 104
- Using the Adaptec RAID 105
- Configuration Utility 105
- Running the ARC Utility 106
- Managing Existing Arrays 107
- Option Description 108
- Initializing Disk Drives 109
- Rescanning Disk Drives 109
- Secure Erasing Disk Drives 109
- Managing Global Hot Spares 109
- Creating a New JBOD 110
- Managing Existing JBODs 110
- Opening SerialSelect 111
- Applying Changes and Exiting 111
- General Controller Settings 112
- Power Management Settings 113
- Locating Disk Drives 114
- Identifying Disk Drives 115
- Viewing the Event Log 115
- System Requirements 117
- Before You Begin 117
- Running the Menu-based AFU 118
- Running the 119
- Quick Reference 123
- 22-55-2161 124
- Pin Number 124
- Specification 126
- Connector Specification 129
- J5 Pin Number Signal 131
- 2258500-R ASR-51645 RoHS Kit 133
- J4 Pin Number Signal 139
- Safety Information 148
- Technical Specifications 149
- Environmental Specifications 150
- DC Power Requirements 150
- Current Requirements 150
- Index ● 151 152
- Index ● 152 153
- Index ● 153 154
- PMC-Sierra, Inc 155
- 1380 Bordeaux Drive 155
- Sunnyvale, CA 94089 USA 155
Related products and manuals for RAID controllers Adaptec 2270700-R
RAID controllers Adaptec RAID 6405 User's Guide
(188 pages)
(188 pages)
RAID controllers Adaptec 6405 User's Guide
(110 pages)
(110 pages)
RAID controllers Adaptec ASR-6405E User's Guide
(145 pages)
(145 pages)
RAID controllers Adaptec ASR-2120S User's Guide
(128 pages)
(128 pages)
© 2020, manymanuals.com. All rights reserved. | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals