Adaptec 2940UW User's Guide download pdf (Page 66)

2-54

PowerDomain 2940UW/3940UW User’s Guide

Stock Number: 510864-00, Rev. B Page: 2-54

Print Spec Number: 493742-00

Current Date: 2/20/96 ECN Date: 2/27/96

Setting SCSI IDs

Each device on the SCSI chain, including the accelerator card, must

have a unique SCSI ID. The computer uses the SCSI ID to identify

the SCSI device on the SCSI chain.

Setting SCSI IDs is a two-step process:

1 Determine the SCSI ID of each device to be connected on the

SCSI chain.

The PowerDomain 2940UW/3940UW is shipped with a SCSI

ID of 7. To determine the SCSI IDs of disk drives, CD-ROM

drives, and other devices, refer to the device documentation.

2 Change the SCSI IDs, if needed, so no IDs are duplicated on

the same SCSI chain and each device has an appropriate SCSI

ID.

Installing Multiple PowerDomain 2940UW/

3940UW Accelerator Cards

You can install multiple PowerDomain 2940UW/3940UW

accelerator cards in your computer if enough PCI expansion card

slots are available. Each accelerator card has its own separate SCSI

chain and attached SCSI devices.

To install additional accelerator cards, repeat steps 7 through 10,

beginning on page 2-7.

Note: If you encounter any problems during installation,

see Chapter 4, Troubleshooting.

❒

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 101 102

No comments

Adaptec 2940UW User's Guide Page 66