Adaptec AHA-1542B User's Guide

INTRODUCTIONI-E97-811-1C 2 - 1SECTION 2 - INSTALLING ADAPTER CARDSINTRODUCTIONNOTE: The instructions in this section apply to AT-type computersONLY

INSTALLING ADAPTER CARDSNETWORK CARDS2 - 10 I-E97-811-1C®Using the following procedure to start the DOS based setupprogram to configure the ALTA Eth

INSTALLING ADAPTER CARDSADAPTEC 1540B/1542B SCSI HOST ADAPTER CARDI-E97-811-1C 2 - 11The card has a dipswitch in the upper left corner of the card

INSTALLING ADAPTER CARDSADAPTEC SCSI HOST ADAPTER CARD: MODEL 1540C/1542C/1542CF2 - 12 I-E97-811-1C®from pin 1 on J8. This will allow the computer&a

INSTALLING ADAPTER CARDSADAPTEC SCSI HOST ADAPTER CARD: MODEL 1540C/1542C/1542CFI-E97-811-1C 2 - 13•Change the ROM address from the factory setting

INSTALLING ADAPTER CARDSADAPTEC SCSI HOST ADAPTER CARD: MODEL 1540C/1542C/1542CF2 - 14 I-E97-811-1C®The Main Menu allows the user to access one of C

INSTALLING ADAPTER CARDSADAPTEC SCSI HOST ADAPTER CARD: MODEL 1540C/1542C/1542CFI-E97-811-1C 2 - 15NOTE: The “Host Adapter SCSI Termination” should

INSTALLING ADAPTER CARDSMKM/EMKI KEYBOARD SWITCHING2 - 16 I-E97-811-1C®Press <Esc> to return to the Configure/View Host Adapter Set-tings Menu

INSTALLING ADAPTER CARDSHARDWARE SETTINGS2 - 2 I-E97-811-1C®Switch settings for the following recommended computers areto be found in Appendix C:HP

INSTALLING ADAPTER CARDSHARDWARE SETTINGSI-E97-811-1C 2 - 3I/O PortsInput output ports (I/O ports) allow your microprocessor tocommunicate with you

INSTALLING ADAPTER CARDSHARDWARE SETTINGS2 - 4 I-E97-811-1C®InterruptsMost cards need to tell the processor when they have informa-tion for the proc

INSTALLING ADAPTER CARDSVIDEO ADAPTER CARDSI-E97-811-1C 2 - 5Usually IRQ7 is not used by the printer, as printers seldomsend data to the computer,

INSTALLING ADAPTER CARDSSERIAL AND PARALLEL PORTS2 - 6 I-E97-811-1C®only two thirds of the graphics display appears on the screen),reboot the comput

INSTALLING ADAPTER CARDSNETWORK CARDSI-E97-811-1C 2 - 7NETWORK CARDSEthernet Network CardIf you are setting up an Ethernet network, you will need o

INSTALLING ADAPTER CARDSNETWORK CARDS2 - 8 I-E97-811-1C®•Locate the entry for the PCI Integrated Ethernet Interface,refer to the computer's Use

INSTALLING ADAPTER CARDSNETWORK CARDSI-E97-811-1C 2 - 9ALTA EtherCombo-16 T/CThe ALTA is an ISA bus, NE1000/NE2000 compatible ethernetcard. All con